Most of the small vape products currently circulating on the market usually have a minimal configuration in pursuit of their small size. Introduced today by Tesla’s “TPOD KIT” vape package, a display screen and a power button are added on a light basis. Both the design or details are full of professional feeling.
The packaging is very compact and cleverish, with a green and white color scheme, and a product thumbnail is printed on the cover. From the perspective of business appearance and low-key, open the way similar to the clamshell design of cigarette cases.
In addition to the complete body with a cartridge, the internal accessories also delivered a multi-language manual, a USB cable (not shown), and a quality inspection card. The factory puts the design effort and cost input on the body, so it is relatively simple in terms of packaging and accessories.
The body computer is made of zinc alloy plus PC material, the size is 83*44*15mm, the weight is about 84 grams, built-in 500mAh battery. From the data, it can be seen that the large-capacity battery makes the body slightly heavier. Fortunately, the streamlined design makes the hand feel very comfortable. The front oval black part is the screen display area, and the back multi-diamond surface is similar to the “turtle shell” shape, which plays a role of anti-slip and beautiful appearance. The metal part of the edge is a rainbow gradient coating, which looks very dazzling.
The buttons on the side only have the switch function. The normal operation is the normal continuous pressing 5 times, and the suction mode uses the automatic air switch. Select the shutdown when not in use can improve the endurance of the product. The USB interface is located under the switch, and the bottom is flatly embedded with a textured LOGO nameplate, so this small vape is supported for standing upright.
The connection between the cartridge and the mainframe adopts the physical snapping method, and the connection is relatively tight. The internal contact is made by the adaptive electrode needle and the cartridge. The groove is deep, so the gap is not obvious, and there is no loosening
Compared with most small cigarettes of the same type, the TPOD KIT cartridge is relatively delicate. The black matte material is very thick, 2ml capacity and supports recirculating oil. Internal structures are sealed invisible forms, increasing product reliability. The principle is that the neutral coil absorbs the oil on both sides of the oil sump and conducts vape through the airway. Careful observation will reveal that the airway is designed to be funnel-shaped, which can play a role in gathering condensation and spreading vape.
The screen will light for approximately 3 seconds after normal pumping: the upper right corner is the battery display, the upper part is the number of suction ports, the left is the length of the last suction, and the right side is the output voltage and current data. Although the screen is huge, it lacks a resistance display and the default vape juice is 1.5 ohms. It may be that the brightness of the display is dark in order to save power, so the effect under strong light is not very good.
After a week of use, TPOD KIT’s mouth-sucking experience is currently ranked among the top ones I use. The suction resistance is tight and the vape is very close to real smoking. The endurance of frequent use for one day is fully guaranteed, and the 2ml of vape oil capacity is more than enough after 2 days. The design of the screen and switch not only increases the playability and high-end, but also the user’s grasp of the power and the duration of use.